I'm trying to install Lineage OS onto my Samsung Galaxy S4 and S5, following the instructions on https://wiki.lineageos.org/devices/jfltexx/install
I've successfully installed Lineage to an S4 before, using these instructions, so I don't understand what's going on.
Both S4 and S5 exhibit the same issue.
I'm stuck at a very early stage (step 4): Instead of 'Replace Driver' I get the caption 'Reinstall Driver' on the button (Zadig v2.0.0.147). I figure that's because I did it before and it's using the same driver (also for the S5???). So perhaps that's fine.
In the instructions there is nothing about changing the target driver and I can install any of them successfully. However, none of the options work when getting to the next step, running heimdall print-pit
Here is the result for each driver:
WinUSB v6.1.7600.16385
Initialising connection...
Detecting device...
Manufacturer: "Sasmsung"
Product: "MSM8960"
length: 18
device class: 2
S/N: 0
VID:PID: 04E8:685D
bcdDevice: 0100
iMan:iProd:iSer: 1:2:0
nb confs: 1
interface[0].altsetting[0]: num endpoints = 1
Class.SubClass.Protocol: 02.02.01
endpoint[0].address: 82
max packet size: 0010
polling interval: 09
interface[1].altsetting[0]: num endpoints = 2
Class.SubClass.Protocol: 0A.00.00
endpoint[0].address: 81
max packet size: 0200
polling interval: 00
endpoint[1].address: 01
max packet size: 0200
polling interval: 00
Claiming interface...
Setting up interface...
Initialising protocol...
WARNING: Control transfer #1 failed. Result: -9
WARNING: Control transfer #2 failed. Result: -9
WARNING: Control transfer #3 failed. Result: -9
WARNING: Control transfer #4 failed. Result: -9
WARNING: Control transfer #5 failed. Result: -9
WARNING: Control transfer #6 failed. Result: -9
libusbx: error [windows_transfer_callback] detected I/O error 87: [87] The param
eter is incorrect.
ERROR: Failed to send data: "ODIN"
Releasing device interface...
libusb0 (v1.2.5.0)
Initialising connection...
Detecting device...
Manufacturer: "Sasmsung"
Product: "MSM8960"
length: 18
device class: 2
S/N: 0
VID:PID: 04E8:685D
bcdDevice: 0100
iMan:iProd:iSer: 1:2:0
nb confs: 1
interface[0].altsetting[0]: num endpoints = 1
Class.SubClass.Protocol: 02.02.01
endpoint[0].address: 82
max packet size: 0010
polling interval: 09
interface[1].altsetting[0]: num endpoints = 2
Class.SubClass.Protocol: 0A.00.00
endpoint[0].address: 81
max packet size: 0200
polling interval: 00
endpoint[1].address: 01
max packet size: 0200
polling interval: 00
Claiming interface...
Setting up interface...
Initialising protocol...
WARNING: Control transfer #1 failed. Result: -1
WARNING: Control transfer #2 failed. Result: -1
WARNING: Control transfer #3 failed. Result: -1
WARNING: Control transfer #4 failed. Result: -1
WARNING: Control transfer #5 failed. Result: -1
WARNING: Control transfer #6 failed. Result: -1
Protocol initialisation successful.
Beginning session...
Some devices may take up to 2 minutes to respond.
Please be patient!
Session begun.
Downloading device's PIT file...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet.
ERROR: Failed to send request to end PIT file transfer!
ERROR: Failed to download PIT file!
Ending session...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet.
ERROR: Failed to send end session packet!
Releasing device interface...
libusbK v3.0.4.0
Initialising connection...
Detecting device...
Manufacturer: "Sasmsung"
Product: "MSM8960"
length: 18
device class: 2
S/N: 0
VID:PID: 04E8:685D
bcdDevice: 0100
iMan:iProd:iSer: 1:2:0
nb confs: 1
interface[0].altsetting[0]: num endpoints = 1
Class.SubClass.Protocol: 02.02.01
endpoint[0].address: 82
max packet size: 0010
polling interval: 09
interface[1].altsetting[0]: num endpoints = 2
Class.SubClass.Protocol: 0A.00.00
endpoint[0].address: 81
max packet size: 0200
polling interval: 00
endpoint[1].address: 01
max packet size: 0200
polling interval: 00
Claiming interface...
Setting up interface...
Initialising protocol...
WARNING: Control transfer #1 failed. Result: -9
WARNING: Control transfer #2 failed. Result: -9
WARNING: Control transfer #3 failed. Result: -9
WARNING: Control transfer #4 failed. Result: -9
WARNING: Control transfer #5 failed. Result: -9
WARNING: Control transfer #6 failed. Result: -9
Protocol initialisation successful.
Beginning session...
Some devices may take up to 2 minutes to respond.
Please be patient!
Session begun.
Downloading device's PIT file...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet.
ERROR: Failed to send request to end PIT file transfer!
ERROR: Failed to download PIT file!
Ending session...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet.
ERROR: Failed to send end session packet!
Releasing device interface...
I've tried this on another Windows machine as well and I get the same issue. So between two computers and two phones I always get stuck in the same place. That only leaves the root of the problem to sit between back of the chair and the keyboard - what am I doing wrongly?
Further research suggests USB driver problems, but that points back to Zadig/heimdall, doesn't it?