DemoUi
Command line tool to access Android Demo Ui
Modes
This tools has 2 modes:
- Standart mode, application will evaluate all arguments, apply them and exit
- Live mode, application starts to listen for supplied arguments and apply them. This mode helps to tweak options and receive fast feedback. To start it use
-largument, to exit from live mode:-le
Configuration
Application supports saving/loading of configurations.
# Loads configuration for a file name `first.demoui` ./demoui -cf first # Saves current configuration to a filename `second.demoui` ./demoui -cs second Configurations can be used with arguments:
./demoui -nwl 3 -cf first Here first configuration will be used as a base. All supplied arguments will override base options.
# Loads `first` configuration, applies `-na 1` argument and saves this configuration to `second` ./demoui -cf first -na 1 -cs second Application saves/loads only files with .demoui extensions (which can be omitted when typing).
Screenshot
To make a screenshot add -s argument followed by a file name
./demoui -na 1 -s "1.png" # applies arguments, takes a screenshot and exits from demo mode ./demoui -na 1 -ch 1012 -s "1.png" && demoui -e -h, --help
All demo ui options are taken from this document
All options have short and long names
usage: demoui [-a <adb-path>] [-ad | -ae | -as <serial>]
[-bl <level>]
[-bp <charging>] [-bs <style>] [-cf <file>] [-ch <hhmm> | -cm
<millis>] [-cs <file>] [-d <enable>] [-de | -e] [-h] [-l | -le]
[-na <show>] [-nc <show>] [-nf <fully>] [-nm <mobile>] [-nmd
<datatype>] [-nml <level>] [-nns <show>] [-ns <sims>] [-nv <show>]
[-nw <wifi>] [-nwl <wifi-level>] [-sa <show>] [-sb <status>] [-sda
<enable>] [-se <show>] [-sl <show>] [-sm <show>] [-ss <show>] [-ssp
<show>] [-st <show>] [-sv <type>] -a,--adb-path <adb-path>
Path to the `adb`
executable, if not provided
adb is considered to be
found in PATH -ad,--adb-device
Uses physical device as a
target for adb -ae,--adb-emulator
Uses emulator as a target
for adb -as,--adb-serial <serial>
Uses device with serial
number as a target for adb -bl,--battery-level <level>
Battery. Sets the battery
level (0 - 100) -bp,--battery-plugged <charging>
Battery. Sets charging
state (`1|true` for
charging, everything else
for non-charging) -bs,--bar-style <style>
Bars. Control the visual
style of the bars
([o]paque, [t]ranslucent,
[s]emi-transparent) -cf,--configuration-file <file>
Loads demo configuration
from a file -ch,--clock-hhmm <hhmm>
Clock. Sets the time in
`hhmm` -cm,--clock-millis <millis>
Clock. Sets the time in
millis -cs,--configuration-save <file>
Saves current demo
configuration -d,--debug <enable>
`1|true` enables printing
of adb executed commands,
everything else disables -de,--enter
Enters demo mode, bar state
allowed to be modified (for
convenience, any of the
other non-exit commands
will automatically flip
demo mode on, no need to
call this explicitly in
practice) -e,--exit
Exits demo mode, bars back
to their system-driven
state -h,--help
Prints help -l,--live
Enters `live` mode -le,--live-exit
Exits `live` mode -na,--network-airplane <show>
Network. `1|true` to show
icon, any other value to
hide -nc,--network-carrier-network-change <show>
Network. Sets mobile signal
icon to carrier network
change UX when disconnected
(`1|true` to show icon, any
other value to hide) -nf,--network-fully <fully>
Network. Sets MCS state to
fully connected (`1|true`
for true, everything else
for false) -nm,--network-mobile <mobile>
Network. `1|true` to show
mobile icon, any other
value to hide -nmd,--network-mobile-datatype <datatype>
Network. Values: `1x`,
`3g`, `4g`, `e`, `g`, `h`,
`lte`, `roam`, any other
value to hide -nml,--network-mobile-level <level>
Network. Sets mobile signal
strength level (0-4) -nns,--network-no-sim <show>
Network. `1|true` to show
no-sim icon, any other
value to hide -ns,--network-sims <sims>
Network. Sets the number of
sims (1-8) -nv,--notifications-hide <show>
Notifications. `0|false` to
hide the notification
icons, any other value to
show -nw,--network-wifi <wifi>
Network. `1|true` to show
wifi icon, any other value
to hide -nwl,--network-wifi-level <wifi-level>
Network. Sets wifi level
(0-4) -sa,--status-alarm <show>
Status. Sets the icon in
the alarm_clock slot
(`1|true` to show, any
other value to hide) -sb,--status-bluetooth <status>
Status. Sets the icon in
the bluetooth slot
([c]onnected,
[d]isconnected, any other
value to hide) -sda,--sysui-demo-allowed <enable>
Modifies global
`sysui_demo_allowed` state,
`1|true` to enable,
everything else to disable -se,--status-eri <show>
Status. Sets the icon in
the cdma_eri slot (`1|true`
to show, any other value to
hide) -sl,--status-location <show>
Status. Sets the icon in
the location slot (`1|true`
to show, any other value to
hide) -sm,--status-mute <show>
Status. Sets the icon in
the mute slot (`1|true` to
show, any other value to
hide) -ss,--status-sync <show>
Status. Sets the icon in
the sync_active slot
(`1|true` to show, any
other value to hide) -ssp,--status-speakerphone <show>
Status. Sets the icon in
the speakerphone slot
(`1|true` to show, any
other value to hide) -st,--status-tty <show>
Status. Sets the icon in
the tty slot (`1|true` to
show, any other value to
hide) -sv,--status-volume <type>
Status. Sets the icon in
the volume slot ([s]ilent,
[v]ibrate, any other value
to hide)
License
Copyright 2017 Dimitry Ivanov ([email protected])
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.