@FreeBuilder

Automatic generation of the Builder pattern for Java 1.6+

The Builder pattern is a good choice when designing classes whose constructors or static factories would have more than a handful of parameters. — Effective Java, Second Edition, page 39

• Background
• How to use @FreeBuilder
  • Quick start
  • What you get
  • Accessor methods
  • Defaults and constraints
  • Optional values
    • Using @Nullable
    • Converting from @Nullable
  • Collections and Maps
  • Nested buildable types
  • Custom toString method
  • Builder construction
  • Partials
  • Jackson
  • GWT
• Build tools and IDEs
  • javac
  • Maven
  • Gradle
  • Eclipse
  • IntelliJ
• Troubleshooting
  • Troubleshooting javac
  • Troubleshooting Eclipse
  • Online resouces
• Alternatives
  • Immutables vs @FreeBuilder
  • AutoValue vs @FreeBuilder
  • Proto vs @FreeBuilder
• Wait, why "free"?
• License

Background

Implementing the Builder pattern in Java is tedious, error-prone and repetitive. Who hasn't seen a ten-argument constructor, thought cross thoughts about the previous maintainers of the class, then added "just one more"? Even a simple four-field class requires 39 lines of code for the most basic builder API, or 72 lines if you don't use a utility like AutoValue to generate the value boilerplate.

@FreeBuilder produces all the boilerplate for you, as well as free extras like JavaDoc, getter methods, mapper methods (Java 8+), collections support, nested builders, and partial values (used in testing), which are highly useful, but would very rarely justify their creation and maintenance burden in hand-crafted code. (We also reserve the right to add more awesome methods in future!)

[The Builder pattern] is more verbose…so should only be used if there are enough parameters, say, four or more. But keep in mind that you may want to add parameters in the future. If you start out with constructors or static factories, and add a builder when the class evolves to the point where the number of parameters starts to get out of hand, the obsolete constructors or static factories will stick out like a sore thumb. Therefore, it's often better to start with a builder in the first place. — Effective Java, Second Edition, page 39

How to use @FreeBuilder

Quick start

See Build tools and IDEs for how to add @FreeBuilder to your project's build and/or IDE.

Create your value type (e.g. Person) as an interface or abstract class, containing an abstract accessor method for each desired field. Add the @FreeBuilder annotation to your class, and it will automatically generate an implementing class and a package-visible builder API ( Person_Builder), which you must subclass. For instance:

import org.inferred.freebuilder.FreeBuilder;  @FreeBuilder public interface Person {

/** Returns this person's full (English) name. */
String name();

/** Returns this person's age in years, rounded down. */
int age();

/** Returns a new {
@link Builder
}
 with the same property values as this person. */
Builder toBuilder();

/** Builder of {
@link Person
}
 instances. */
class Builder extends Person_Builder {
 
}
 
}

The toBuilder() method here is optional but highly recommended. If you are writing an abstract class, or using Java 8, you may wish to hide the builder's constructor and manually provide instead a static builder() method on the value type (though Effective Java does not do this).

What you get

If you write the Person interface shown above, you get:

• A builder class with:
  • a no-args constructor
  • JavaDoc
  • getters (throwing IllegalStateException for unset fields)
  • setters
  • lambda-accepting mapper methods (Java 8+)
  • from and mergeFrom methods to copy data from existing values or builders
  • a build method that verifies all fields have been set
    • see below for default values and constraint checking
• An implementation of Person with:
  • toString
  • equals and hashCode
• A partial implementation of Person for unit tests with:
  • UnsupportedOperationException-throwing getters for unset fields
  • toString
  • equals and hashCode
  • a special toBuilder() method that preserves the 'partial' aspect on newly-minted Person instances

Person person = new Person.Builder()
  .name("Phil")
  .age(31)
  .build();
 System.out.println(person);
  // Person{
name=Phil, age=31
}

JavaBean convention

If you prefer your value types to follow the JavaBean naming convention, just prefix your accessor methods with 'get' (or, optionally, 'is' for boolean accessors). FreeBuilder will follow suit, and additionally add 'set' prefixes on setter methods, as well as dropping the prefix from its toString output.

@FreeBuilder public interface Person {

/** Returns the person's full (English) name. */
String getName();

/** Returns the person's age in years, rounded down. */
int getAge();

/** Builder of {
@link Person
}
 instances. */
class Builder extends Person_Builder {
 
}
 
}
  Person person = new Person.Builder()
  .setName("Phil")
  .setAge(31)
  .build();
 System.out.println(person);
  // Person{
name=Phil, age=31
}

Accessor methods

For each property foo, the builder gets:

The mapper methods are very useful when modifying existing values, e.g.

Person olderPerson = person.toBuilder().mapAge(age -> age + 1).build();

Defaults and constraints

We use method overrides to add customization like default values and constraint checks. For instance:

@FreeBuilder public interface Person {

/** Returns the person's full (English) name. */
String name();

/** Returns the person's age in years, rounded down. */
int age();

/** Returns a human-readable description of the person. */
String description();

/** Builder class for {
@link Person
}
. */
class Builder extends Person_Builder {

  public Builder() {

 // Set defaults in the builder constructor.

 description("Indescribable");

  
}

  @Override Builder age(int age) {

 // Check single-field (argument) constraints in the setter method.

 checkArgument(age >= 0);

 return super.age(age);

  
}

  @Override public Person build() {

 // Check cross-field (state) constraints in the build method.

 Person person = super.build();

 checkState(!person.description().contains(person.name()));

 return person;
  
}

}
 
}

Optional values

If a property is optional—that is, has no reasonable default—then use the Java 8 Optional type (or the Guava Optional type for backwards-compatibility).

  /** Returns an optional human-readable description of the person. */
Optional<String> description();

This property will now default to Optional.empty(), and the Builder will gain additional convenience setter methods:

Prefer to use explicit defaults where meaningful, as it avoids the need for edge-case code; but prefer Optional to ad-hoc 'not set' defaults, like -1 or the empty string, as it forces the user to think about those edge cases.

Using @Nullable

As Java currently stands, you should strongly prefer Optional to returning nulls. Using null to represent unset properties is the classic example of Hoare's billion-dollar mistake: a silent source of errors that users won't remember to write test cases for, and which won't be spotted in code reviews. The large "air gap" between the declaration of the getter and the usage is the cause of this problem. Optional uses the compiler to force the call sites to perform explicit null handling, giving reviewers a better chance of seeing mistakes. See also Using and Avoiding Null.

Obviously, greenfield code can trivially adopt Optional, but even existing APIs can be converted to Optional via a simple refactoring sequence; see below. However, if you have compelling legacy reasons that mandate using nulls, you can disable null-checking by marking the getter method @Nullable. (Any annotation type named "Nullable" will do, but you may wish to use javax.annotation.Nullable, as used in Google Guava.)

  /** Returns an optional title to use when addressing the person. */
@Nullable String title();

This property will now default to null, and the Builder's setter methods will change their null-handling behaviour:

Converting from @Nullable

This is the O(1), non-tedious, non–error-prone way we recomment converting @Nullable to Optional:

• Load all your code in Eclipse, or another IDE with support for renaming and inlining.
• [IDE REFACTOR] Rename all your @Nullable getters to nullableX() (or getNullableX() if you use JavaBean naming conventions).
• Add an Optional-returning x() (or getX())
• Implement your nullableX methods as: return x().orElse(null)
  (Guava: return x().orNull())
• [IDE REFACTOR] Inline your nullableX() methods

At this point, you have effectively performed an automatic translation of a @Nullable method to an Optional-returning one. Of course, your code is not optimal yet (e.g. if (foo.x().orElse(null) != null) instead of if (foo.x().isPresent()) ). Search-and-replace should get most of these issues.

• [IDE REFACTOR] Rename all your @Nullable setters to nullableX (or setNullableX).

Your API is now @FreeBuilder-compatible :)

Collections and Maps

@FreeBuilder has special support for collection and map properties, removing the foo accessor method and generating new ones appropriate to the type. Collection and map properties default to an empty collection/map and cannot hold nulls.

  /** Returns a list of descendents for this person. **/
List<String> descendants();

A List, Set, SortedSet or Multiset property called 'descendants' would generate:

  /** Returns a map of favourite albums by year. **/
Map<Integer, String> albums();

A Map property called 'albums' would generate:

  /** Returns a multimap of all awards by year. **/
SetMultimap<Integer, String> awards();

A Multimap property called 'awards' would generate:

In all cases, the value type will return immutable objects from its getter.

The mutator methods are useful for invoking methods not directly exposed on the builder, like subList, or methods that take a mutable collection, like sort:

personBuilder
  // Delete the fourth and fifth descendants in the list
  .mutateDescendants(d -> d.subList(3,5).clear())
  // Sort the remaining descendants
  .mutateDescendants(Collections::sort);

Nested buildable types

  /** Returns the person responsible for this project. */
Person owner();

@FreeBuilder has special support for buildable types like protos and other @FreeBuilder types. A buildable property called 'owner' would generate:

The mutate method allows the buildable property to be set up or modified succinctly and readably in Java 8+:

Project project = new Project.Builder()
  .mutateOwner(b -> b

.name("Phil")

.department("HR"))
  .build();

Custom toString method

FreeBuilder will only generate toString, hashCode and equals methods if they are left abstract, so to customise them, just implement them. (Due to language constraints, you will need to first convert your type to an abstract class if it was previously an interface.)

abstract class Person {

public abstract String name();

public abstract int age();

 @Override public String toString() {

  return name() + " (" + age() + " years old)";

}

 public static class Builder extends Person_Builder {

}
 
}

Note that it is a compile error to leave hashCode abstract if equals is implemented, and vice versa, as FreeBuilder has no reasonable way to ensure the consistency of any implementation it might generate.

Warning: It is rarely a good idea to redefine equality on a value type, as it makes testing very hard. For instance, assertEquals in JUnit relies on equality; it will not know to check individual fields, and as a result, tests may be failing to catch bugs that, on the face of it, they looks like they should be. If you are only testing a subset of your fields for equality, consider separating your class in two, as you may have accidentally combined the key and the value of a map into a single object, and you may find your code becomes healthier after the separation.

Builder construction

Effective Java recommends passing required parameters in to the Builder constructor. While we follow most of the recommendations therein, we explicitly do not follow this one: while you gain compile-time verification that all parameters are set, you lose flexibility in client code, as well as opening yourself back up to the exact same subtle usage bugs as traditional constructors and factory methods. For the default @FreeBuilder case, where all parameters are required, this does not scale.

If you want to follow Effective Java more faithfully in your own types, however, just create the appropriate constructor in your builder subclass:

 public Builder(String name, int age) {

 // Set all initial values in the builder constructor

 name(name);

 age(age);

  
}

Implementation note: in javac, we spot these fields being set in the constructor, and do not check again at runtime.

Partials

A partial value is an implementation of the value type which does not conform to the type's state constraints. It may be missing required fields, or it may violate a cross-field constraint.

Person person = new Person.Builder()
  .name("Phil")
  .buildPartial();
  // build() would throw an IllegalStateException here System.out.println(person);
  // prints: partial Person{
name=Phil
}
 person.age();
  // throws UnsupportedOperationException

As partials violate the (legitimate) expectations of your program, they must not be created in production code. (They may also affect the performance of your program, as the JVM cannot make as many optimizations.) However, when testing a component which does not rely on the full state restrictions of the value type, partials can reduce the fragility of your test suite, allowing you to add new required fields or other constraints to an existing value type without breaking swathes of test code.

To allow robust tests of modify-rebuild code, the toBuilder() method on partials returns a subclass of Builder that returns partials from the build() method.

Person anotherPerson = person.toBuilder().name("Bob").build();
 System.out.println(anotherPerson);
  // prints: partial Person{
name=Bob
}

(Note the from and mergeFrom methods do not behave this way; instead, they will throw an UnsupportedOperationException if given a partial.)

Jackson

To create types compatible with the Jackson JSON serialization library, use the builder property of @JsonDeserialize to point Jackson at your Builder class. For instance:

// This type can be freely converted to and from JSON with Jackson @JsonDeserialize(builder = Address.Builder.class) interface Address {

  String city();

  String state();

class Builder extends Address_Builder {

}
 
}

@FreeBuilder will generate appropriate @JsonProperty annotations on the builder. (If you use Java 8 or Guava types, you may need to include the relevant Jackson extension modules, jackson-datatype-jdk8 and jackson-datatype-guava.)

GWT

To enable GWT serialization of the generated Value subclass, just add @GwtCompatible(serializable = true) to your @FreeBuilder-annotated type, and extend/implement Serializable. This will generate a CustomFieldSerializer, and ensure all necessary types are whitelisted.

Build tools and IDEs

javac

Download the latest FreeBuilder JAR and add it to the classpath (or processorpath, if you supply one) on the command line. If Guava is available, FreeBuilder will use it to generate cleaner, more interoperable implementation code (e.g returning immutable collections).

Maven

Add the @FreeBuilder artifact as an optional dependency to your Maven POM:

<dependencies>
<dependency>
  <groupId>org.inferred</groupId>
  <artifactId>freebuilder</artifactId>
  <version>[current version]</version>
  <optional>true</optional>
</dependency> </dependencies>

If Guava is available, FreeBuilder will use it to generate cleaner, more interoperable implementation code (e.g returning immutable collections).

Gradle

Add the following lines to your project's build.gradle file:

plugins {

id 'org.inferred.processors' version '1.2.10' 
}
  dependencies {

processor 'org.inferred:freebuilder:<current version>' 
}
 

This uses the org.inferred.processors plugin to correctly configure code generation in your IDE. Alternatively, you can drop the plugin and replace processor with compileOnly, or compile if you are on Gradle 2.11 or earlier—you will lose IDE integration—or use your own favourite Gradle annotation processor plugin.

If Guava is available, FreeBuilder will use it to generate cleaner, more interoperable implementation code (e.g returning immutable collections).

Eclipse

Condensed from Eclipse Indigo's documentation.

Download the latest FreeBuilder JAR and add it to your project. Select it, right-click and choose Build path > Add to Build path.

In your projects properties dialog, go to Java Compiler > Annotation Processing and ensure Enable annotation processing is checked. Next, go to Java Compiler > Annotation Processing > Factory Path, select Add JARs, and select the FreeBuilder JAR.

IntelliJ

Condensed from the IntelliJ 14.0.3 documentation and Auto Issue #106.

Download the latest FreeBuilder JAR, add it to your project, right-click it and select Use as Project Library.

In your Settings, go to Build, Execution, Deployment > Compiler > Annotation Processors and ensure Enable annotation processing is selected, and Store generated sources relative to is set to Module content root. (If you have specified a processor path, ensure you add the new JAR to it. Similarly, if you choose to specify processors explicitly, add org.inferred.freebuilder.processor.Processor to the list.)

Run Build > Rebuild Project, then right-click the new generated folder (this may have a different name if you have changed the Production sources directory setting) and select Mark Directory As > Generated Sources Root.

Troubleshooting

Troubleshooting javac

If you make a mistake in your code (e.g. giving your value type a private constructor), @FreeBuilder is designed to output a Builder superclass anyway, with as much of the interface intact as possible, so the only errors you see are the ones output by the annotation processor.

Unfortunately, javac has a broken design: if any annotation processor outputs any error whatsoever, all generated code is discarded, and all references to that generated code are flagged as broken references. Since your Builder API is generated, that means every usage of a @FreeBuilder builder becomes an error. This deluge of false errors swamps the actual error you need to find and fix. (See also the related issue.)

If you find yourself in this situation, search the output of javac for the string "@FreeBuilder type"; nearly all errors include this in their text.

Troubleshooting Eclipse

Eclipse manages, somehow, to be worse than javac here. It will never output annotation processor errors unless there is another error of some kind; and, even then, only after an incremental, not clean, compile. In practice, most mistakes are made while editing the @FreeBuilder type, which means the incremental compiler will flag the errors. If you find a generated superclass appears to be missing after a clean compile, however, try touching the relevant file to trigger the incremental compiler. (Or run javac.)

Online resouces

• If you find yourself stuck, needing help, wondering whether a given behaviour is a feature or a bug, or just wanting to discuss @FreeBuilder, please join and/or post to the @FreeBuilder mailing list.
• To see a list of open issues, or add a new one, see the @FreeBuilder issue tracker.
• To submit a bug fix, or land a sweet new feature, read up on how to contribute.

Alternatives

Immutables vs @FreeBuilder

Where is Immutables better than @FreeBuilder?

Immutables provides many of the same features as @FreeBuilder, plus a whole host more. Some are optional ways to potentially enhance performance, like derived and lazy attributes, singleton and interned instances, and hash code precomputation. Some are API-changing: strict builders provide a compile-time guarantee that all fields are set (but limit the use of builders as a consequence), while copy methods provide a concise way to clone a value with a single field changed (but require you to reference the generated ImmutableFoo type, not Foo). It provides advanced binary serialization options and GSON support. It lets you easily customize the conventional method prefixes. As Immutables is an active project, this list is likely incomplete.

Where is @FreeBuilder better than Immutables?

@FreeBuilder provides some features that are missing from, or not the default in, Immutables:

• Partials.
• Builder getter, mapper and mutation methods.
• Nested builders.
• Jackson serialization is clean and easily customised.
• GWT support
• Proxyable types ¹.
• Traditional OO customization¹.

The first three points are increasingly useful as your interfaces grow in complexity and usage. Partials greatly reduce the fragility of your tests by only setting the values the code being tested actually uses. Your interfaces are liable accumulate more constraints, like new required fields, or cross-field constraints, and while these will be vitally important across the application as a whole, they create a big maintenance burden when they break unit tests for existing code that does not rely on those constraints. Builder getter, mapper and mutation methods and nested builders empower the modify-rebuild pattern, where code changes a small part of an object without affecting the remainder.

The last two points arise because Immutables is type-generating: you write your value type as a prototype, but you always use the generated class. This type is final, meaning you can't proxy it, which unfortunately breaks tools like Mockito and its wonderful smart nulls. The generated builder is hard to customize as you cannot override methods, explaining why Immutables has so many annotations: for instance, the @Value.Check annotation is unnecessary in @FreeBuilder, as you can simply override the setters or build method to perform field or cross-field validation.

1: But note that you can write a Builder subclass in your Foo type, enabling FreeBuilder-style override-based customization, though that is not the default approach recommended in the guide, and you will break all your callers if you change between the two.

Immutables is a very active project, frequently adding new features, and future releases may address some or all of these deficiencies.

AutoValue vs @FreeBuilder

Why is @FreeBuilder better than AutoValue?

It’s not! AutoValue provides an implementing class with a package-visible constructor, so you can easily implement the Factory pattern. If you’re writing an immutable type that needs a small number of values to create (Effective Java suggests at most three), and is not likely to require more in future, use the Factory pattern.

How about if you want a builder? AutoValue.Builder lets you explicitly specify a minimal Builder interface that will then be implemented by generated code, while @FreeBuilder provides a generated builder API. AutoValue.Builder is better if you must have a minimal API—for instance, in an Android project, where every method is expensive—or strongly prefer a visible-in-source API at the expense of many useful methods. Otherwise, consider using @FreeBuilder to implement the Builder pattern.

I used AutoValue, but now have more than three properties! How do I migrate to @FreeBuilder?

1. Ensure your getter methods start with 'get' or 'is'.
2. Change your annotation to @FreeBuilder.
3. Rewrite your factory method(s) to use the builder API.
4. Inline your factory method(s) with a refactoring tool (e.g. Eclipse).

You can always skip step 4 and have both factory and builder methods, if that seems cleaner!

Can I use both AutoValue and @FreeBuilder?

Not really. You can certainly use both annotations, but you will end up with two different implementing classes that never compare equal, even if they have the same values.

Proto vs @FreeBuilder

Protocol buffers have provided builders for ages. Why should I use @FreeBuilder?

Protocol buffers are cross-platform, backwards- and forwards-compatible, and have a very efficient wire format. Unfortunately, they do not support custom validation logic; nor can you use appropriate Java domain types, such as Instant or Range. Generally, it will be clear which one is appropriate for your use-case.

Wait, why "free"?

• Free as in beer: you don't pay the cost of writing or maintaining the builder code.
• Free as in flexible: you should always be able to customize the builder where the defaults don't work for you.
• Free as in liberty: you can always drop @FreeBuilder and walk away with the code it generated for you.

License

Copyright 2014 Google Inc. All rights reserved.  Licensed under the Apache License, Version 2.0 (the "License");
 you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.