Can't boot into recovery or fastboot and not going to EDL completely (Redmi Note 4)

Question

Please read the full text and help me if anything can solve my problem. Also I can't go to Mi help center due to this lockdown, so can you suggest ways the help center person would do to fix this issue?

I have Redmi Note 4 (SD).
I flashed MIUI 11.0.6.0 port for mido (ROM discussed in this video.)
It had many bugs so I was trying to flash back to stock ROM using Mi Flash Tool (old version).

I was using linux for fastboot and adb commands and for Mi Flash Tool i was using win 7 in virtual box

I selected clean_all&lock.bat
But after systerm image processing it gave me error

error message said something about partition not been empty(sorry cant remember the exact error and log file also doesn't exist anymore)

Now my phone was on fastboot mode for atleast 5 hours so I used

fastboot reboot

via linux terminal.

But phone didn't boot and gave me black (empty screen)

I thought might be battery is low but when I connected it to charger nothing happened.

I couldn't boot to recovery or fastboot mode (and can't do it now too).

I searched on internet more for help and found about EDL mode.
I tried that but Virtual Machine wasn't loading the Qualcomm driver so I installed windows 10 .

ALSO
I searched about the error on internet and found the solution to use latest mi flash tool.

So I tried with that. BUT I AM NOT SURE IF IT IS CONNECTED BY PROPER EDL MODE BECAUSE MI FLASH TOOL INSTEAD OF SHOWING COMX AS DEVICE NAME, IT IS SHOWING MY INCOMPLETE FASTBOOT DEVICE NAME .

I clicked to flash by selecting clean all&lock but it gave me this error

The volume does not contain a recognized file system.Please make sure that all required file system drivers are loaded and that the volume is not corrupted.

ALSO THE DEVICE IS SHOWN IN LATEST VERSION BUT NOT IN OLDER VERSION IN EDL MODE

Then after many attempts to flash

Now it shows this

$fastboot -s 34564c88 getvar product 2>&1 | findstr /r /c:"^product: *MSM8953" || fastboot -s 34564c88 getvar product 2>&1 | findstr /r /c:"^product: *mido" || echo Missmatching image and device

It was stuck at this for like 1000+ seconds.

I searched about it and tried this solution. In this it tell to delete line 10 and 11 but in mine file it was present at 4 places so i deleted them all.

But then it got stuck at next command in clean_all&lock.bat file

[9:39:38 PM 34564c88]:start process id 8956 name cmd
[9:39:38 PM 34564c88]:info1:$rem fastboot -s 34564c88 erase bk12 2>&1
[9:39:38 PM 34564c88]:info1:$if not 0 == 0 exit /B 1
[9:39:38 PM 34564c88]:info1:$fastboot -s 34564c88 oem device-info 2>&1 | findstr /r /c:"Device unlocked: true" || echo Device oem locked

To give a try I deleted this line too but then it got stuck at next line.

ALSO TO ACCESS EDL WE NEED TO SHORT JTAG PINS BUT MY LAPTOP (WITH WIN 10) ACCEPTS IT WITHOUT DOING THAT

— Pragyan | Sources

Answer

Alecxs helped me with the solution so I am posting the solution that worked for me.

Install MIUI 9.6.8.0 fastboot ROM (it works with this only) and extract it to C drive.

Run MI flash tool and select the extracted folder.

Now boot the phone to EDL Mode and immediately click refresh and then click flash.
Because if you are even 2-3 seconds late then process fails.

Wait for flashing to complete and then the phone will reboot.
If it doesn't reboot then just check (press them a little bit) all the connectors on motherboards of phone (display, fingerprint and battery) and then connect to charger. Battery icon will appear and now you can power ON the phone.

BOOTING TO EDL MODE

Don't remove battery. Not required.

To boot to EDL we need to short JTAG pins that are present on right side of fingerprint connector. (And not the 1st and 4th test points shown in many videos on internet).
And while shorting it insert the usb cable immediately.
You will see red led light blinking.
Phone will be shown as COM4 (probably).

For more information search google with test points for Redmi Note 4

You will be forced to update to MIUI 11.0.2.0 because you will face
various bugs like

mi cloud won't sync

fingerprint won't work

OTHER THINGS TO KEEP IN MIND

If you decide to update to MIUI 11.0.2.0 then don't install RedWolf or ** OrangeFox** recovery because when you enable OTA updates in them and flash MIUI 11 rom you will get *ERROR 7 * message and and when you reboot you phone will stuck on MI logo.

When stuck on MI logo then don't try flashing rom again using Mi Flash Tool by booting to Fastboot mode (if you can boot to it) because you will get System flashing error.

FIX FOR STUCK ON MI LOGO

Requirements

unlocked bootloader

adb and fastboot tools

fastboot extracted rom (can be MIUI 11)

If you are stuck there then don't worry. Try if you can boot to Fastboot Mode (Vol - with power key). If not then try recovery mode or repeat EDL method. If yes then read ahead.

If you can then install adb and fastboot tools in your PC. And paste all images folder files of MIUI 11 fastboot rom to adb folder.
Now type the following:

Check if phone is accepted by

fastboot devices

Now flash system.img by

fastboot flash system system.img

After completion flash boot.img by

fastboot flash boot boot.img

After completion flash recovery.img

fastboot flash recovery recovery.img

After completion flash cache.img

fastboot flash cache cache.img

If you want to completely erase user data and make the device a newly
bought then type
fastboot erase userdata
After completion type
fastboot flash userdata userdata.img

Flashing is completed

Now just type fastboot reboot. Phone will boot properly now.

If you are using MIUI 9 or 10 rom to fix stuck on mi logo then when
the flashing is done you will face numerous bugs in rom like

mi cloud won't sync

fingerprint won't work properly

— Pragyan | Sources

Can't boot into recovery or fastboot and not going to EDL completely (Redmi Note 4)

Topics